PAPER SUBMISSIONS

Online Submission Information for Authors Copyright Policy Publication Ethics Publication Malpractic

Publication Ethics

To maintain the integrity and quality of IJM, the following principles of Publication Ethics are strictly adhered to:

As Editors:

  1. The IJM practices double-blind peer review process and maximizes effort to prevent any conflict of interests between the authors, the editors and the reviewers.
  2. The IJM is committed to use plagiarism detecting software to screen submitted papers and reserves the right to reject any paper with high similarity score.

As Authors:

  1. Only original works are submitted. Any plagiarism detected would lead to outright rejection.
  2. The submitted papers are not concurrently submitted to other journals.
  3. Use of all works from other sources should be acknowledged by appropriate citation and referencing.
  4. All possible conflicts of interests must be disclosed during the submission of the first draft.
  5. Agreement shall be given to transfer copyright of publication before submitting the article.

As Reviewers:

  1. All information related to the submitted papers must be kept as confidential.
  2. Any detection of copyright infringement and plagiarism on the author’s side must be promptly communicated to the editor.
  3. All submitted papers shall be reviewed fairly and objectively.

 

Author Guidelines

Author Guidelines

General Instructions

Articles written on A4 paper (21 cm x 29.7 cm) using Font Times New Roman 12 pts, with the top, bottom, left, and right margin 20 mm. Manuscripts created using Microsoft Word with a single space. For all the content, please follow the template.

Writing Instructions

Abstract

The abstract must contains the research background, the objectives & benefits of the research, methods, results, and discussion as well as the conclusions. The contents of the abstract are no more than 250 words.

1. Introduction

The introduction should discuss several things, namely: 1) Research Background. The importance of the research to be carried out must be stated. 2) Literature review. Explain the previous research related to the current research, then state the position and the difference of the current research with the previous research. 3) Objective and Benefits of research. There are no sub-chapters in the introduction.

2. Methods

The methods must include several things, namely: 1) The object of research. Describe the object of research. Explain the acquisition of research data. 2) Treatment of research objects. Indicate variations were carried out in the study. 3) Methods of solving along with the procedures used to examine. Point out whether the method has been widely used or the latest method along with the advantages and disadvantages of the method. 4) Tools and materials used in research. Describe the main tools and materials used, but no need to explain in detail.

 3. Results And Discussion

This chapter contains the results or findings of the research with the discussions. There is not allowed to only display the research data without the discussion. The contents of the discussion can also be compared with research data from other researchers. Describe the result of research in accordance with existing theories or with other similar research. The impact of changing variables that have been stated in the Methods Chapter must also be discussed with scientific reasons.

3.1. Instructions for Using the Table

The table is not allowed as a picture. The table starts with "Table 1" and so on. It does not start with a chapter or sub-chapter. For example: “Table 1” and not “Table 3.1”. The title of the table is written with capital letters at the beginning of words. The position of the table along with the title are in the center and is above the table. The table is made with horizontal lines without vertical lines. Tables are made without color. Table labels use a bold font. If the table is wide enough, then the table can be made 1 column. The table must "in line with text", it can't be above the text. To referring the table, don't use the word "above", (e.g. "in the table above"), but it should be immediately mentioned to the table name, (e.g. "in Table 1"). Examples of tables can be seen in the template.

3.2. Instructions for using images and graphics

Images and graphics must be displayed clearly and not blurry. The position must be in the "center" and "in line with text". Image numbering starts from "Figure 1" and so on. The image title is directly below the image. The name of the image title is written in capital letters at the beginning of the word. To referring a picture, do not use the word "above", (for example: "in the picture above"), but instead directly refer to the name of the image, (for example: "in Figure 1"). Examples of images can be seen in the template.

3.3. Instructions for using math equations

Equations are written using the equation editor on Mic. Word. Mathematical equations are written in tables with 2 columns without borders. The first column for writing mathematical equations and its position is in the center of the column (center). The second column for writing the equation number. The equation number starts from 1 to the end without being associated with a chapter or sub-chapter, for example: (1) and is aligned to the right (Align Right). The explanation of the symbol of the equation explained in the paragraph, it is not allowed to explained vertically. Examples of writing mathematical equations along with an explanation of symbols can be seen in the template.

4. Conclusion

The conclusion must answer the research objectives. Avoid a numbering to describes the conclusion. If absolutely necessary, the numbering should be done horizontally as follows: 1) Fill in number one. 2) Fill in number two. 3) Fill in number three. There are no sub-chapters in the conclusion.

Acknowledgment

If needed, please say thank you to the person/institution who helped the research.

References

All references that referenced in the article must be listed in the references with a minimum number of references in each article 10 references. It must contain 80% of primary sources (scientific journals) published no later than ten years. Writing a reference system in the article text should use a reference management application program such as Mendeley, EndNote, and Zotero with the IEEE (numbering) format. It is not recommended to write manually. References are written with the letters Times New Roman 12. Examples of writing references (citations) and bibliography are as follows. For books [1], book chapters [2], online journal articles / e-journals [3], conference articles [4].

[1]   O. M. Faltinsen, Hydrodynamics of High-Speed Marine Vehicle, Cambridge: Cambridge University Press, 2005.

[2]   W. S. Vorus, "Vibration," in Principle of Naval Architecture Series, Jersey City, The Society of Naval Architects and Marine Engineers, 2010

[3]   H. Hashimoto, S. Yoneda, Y. Tahara and E. Kobayashi, "CFD-Based Study on the Prediction of Wave-Induced Surge Force," Ocean Engineering, vol. 120, pp. 389-397, 2016.

[4] M. Iqbal and I. K. A. P. Utama, "An Investigation into the Effect of Water Depth on the Resistance Components of Trimaran Configuration," in The 9 th International Conference on Marine Technology, Surabaya, 2014.

 

Submission Preparation Checklist

As part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.

  1. The manuscript to be submitted has not been published before nor is it in the process of being submitted in another journal.

  2. Make sure the contents of the article have no elements of plagiarism.

  3. Make sure you have read and followed the writing instructions listed on the website. Please download a journal template to help adjust the standard format of the Journal.

 

Copyright Notice

COPYRIGHT TRANSFER AGREEMENT

I, the corresponding author, acting with the consent of all authors listed on the above manuscript, hereby agree to transfer copyright of work to the Department of Naval Architecture, Hasanuddin University as the journal publisher.

I/We reserve the following :

  1.  All proprietary rights other than copyright, such as patent rights
  2. The right to use all or part of this article in future works of our own, such as in books and lectures.

 

Privacy Statement

The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party.

Bagian penulis